Airbot TD215 F4 2306 5"

-Wheelbase: 215mm 
-Fuselage floor: 3MM*1

-Arm: 4MM*4

-Upper plate: 2MM*1

-7075 aluminum column: 25MM*4
 

-STM32 F405 MCU,Runs Betaflight firmware (supported from  v3.2) 

-MPU6000 Over SPI Bus in damping box.

-30.5 x 30.5 mm Mounting holes

-Supports Lipo direct plugin (3-6S)

-Supports 5V 1A BEC output (Buck)

-Supports 8V 1A BEC with LC filter output for the camera and VTX(Buck)

-STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)

-More caps to reduce gyro power noise.     
  

STM32 F4The Omnibus F4 V6 flight controller uses the MPU6000 over SPI
for the stable flight performance. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.

Omnibus F4 V6 using same target as Omnibus Fire works supports 3-6s LIPO direct input, has 5x Hardware UARTs.

-32bit ESC with BLHELI32 firmware

-Supports 3-6S lipo input

-4PWM input

-Voltage output (VBAT)

-NO BEC

-Supports oneshot / Multishot / Dshot PWM

-Mounting holes 30.5x30.5mm

-Supports damped light

-More caps to reduce power noise
 

-KV: 2700

-Configu-ration: 12N14P

-Stator Diamter: 23mm

-Stator Length: 6mm

-Shaft Diameter: 4mm(Hollow)

-Motor Dimension(Dia.*Len): Φ28.9*31.1mm

-Weight(g): 30.5 (3cm Wire)

-No.of Cells(Lipo): 3~4S

-Internal Resistance: 34mΩ

-Max Current(30S): 55A

-Max.Effciency Current: (4-8A)>84%
 

-Power: 5-40V ultra wide voltage input

-Photosensitive chip: 1/3 CCD sensor (4:3)

-Horizontal resolution: 600TVL

-Camera size: 19mm*19mm*19mm

-Working temperature: -20 ° C -60 ° C

-Camera weight: 6.6G
 

-Dimension

-Outer Frame: 36*36*4.3 mm (L*W*H)

-Inner Frame: 28*28*4.3 mm (L*W*H)

-Weight: 3.7g

-Transmission Frequency: 5.8 GHz

-Available Channel: 26CH

-Operating Voltage: DC 7V~28V

-Operating Current: 100mA@12V (25mW)

-Transmission Power: <0.01mW(Pit Mode)/ 25mW

 

-The VS600 is the first video transmitter developed by FrSky team. The 26
channel Video Transmitter features a very useful Pit Mode that allows the
users to power it up at a low power(25mW) to change settings and conduct
tests during racing events without the fear of interfering with live channels.
Selecting your Operating Bands and Channels are easily adjusted with two
push buttons and the indicator LEDs are easy to read. The Pigtail Antenna
with UFL connection can easily be placed in the optimal location. Uniquely
the VS600 has 2 different mounting hole options in 1 board, 31mm spacing
and 20mm spacing. One of the most useful features is that all the setting
can be fully adjusted via OpenTX Lua Script and the FrSky FreeLink App.

-Pit Mode supported

-Small and portable