Happymodel Snapper6 65mm Standart

Happymodel Snapper6 65mm Micro 1S Brushless FPV Racing RC Drone w/ F3 OSD BLHeli_S 5A ESC BNF 

 

Description:

Brand name: Happymodel

Item name: Snapper6 FPV racing Drone

Wheelbase: 65mm

Basic version: with one battery and one USB Lipo/LIHV charger

Standard version: with 3 batteries and one 1S06 6 way Lipo/LIHV charger

Receiver: Compatible Frsky receiver / Compatible Flysky Receiver / Compatible DSMX DSM2 Receiver

Size: 81mm*81mm*36mm

Items	Specifications
SE0603 19000KV brushless motor	Configu-ration: 9N12P Stator diamter: 6mm Stator length: 3mm Shaft diameter: Φ0.8mm Motor dimension(Dia.*Len): Φ9mm*15.5mm Weight(g): 1.7g No.of cells(Lipo): 1S
Crazybee F3 flight controller	Firmware: Betaflight_3.3.0_Crazybee MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Board weight: 3.5g Power supply: 1S battery input (DC 3.5-4.35V) Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready Built-in Frsky receiver with telemetry (D8/D16 switchable) Built-in Betaflight OSD (SPI Control) Built-in Current meter Max 14A Built-in 5V 0.8A BEC with LC filter Built-in voltage detection BLHELI_S pass-through ready Heading LED ready
BLHeli_S 5A 4 in 1 ESC	Power supply: 1S LiPo/LiPo HV (4.2v/4.35v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_L_5_REV16_6.HEX Default protocol: DSHOT600
Frsky receiver version	SPI BUS receiver Frsky D8/D16 switchable Compatible both of Non EU and EU LBT transmitter Channels: 8ch or 16ch Failsafe support No ground interference (Transmitter and receiver 1m from the ground): 300m
Flysky receiver version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference (Transmitter and receiver 1m from the ground): 300m Failsafe support
AIO Camera & VTX	Output power: 25mw Frequency: 48CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 6 bands 48 channels With raceband: 5474 5945 MHZ Size: 13.9"12.0mm (L*W) Weight: 3g
3.8V 250mAh Lipo battery	Capacity: 250mAh Voltage: 3.8V Continuous discharge rate: 30C Instantaneous discharge rate: 60C Size: 55x12x7mm Weight: 13.6g Connector: PH2.0

 

Features:

Betaflight support, multi flight mode: ACRO/AIR/ANGLE.

Powerful brushless motor and smooth ESC. 

CNC aluminum alloy propeller guard. 

Betaflight OSD support, easy to get RSSI, voltage and other info from your goggles.

Adjust the settings and the PID of the flight controller via OSD.

Frsky version support both EU LBT and NON-EU Frsky transmitter.

Flysky version support both AFHDS and AFHDS-2A Protocol Flysky transmitter.

Full telemetry function ready.

Head lights ready.

Camera angle adjustable.

Real Bind and Fly version.

Snapper 6 65mm 1S FPV racing drone flysky BNF Manual

Snapper 6 65mm 1S FPV racing drone frsky BNF Manual
 

Package included:
 

Basic version

1 x Snapper 6 frame

1 x Crazybee F3 FC (Frsky and Flysky option)

4 x SE0603 KV19000 Motor

1 x 31mm 3-blades propeller set (4cw+4ccw)

1 x AIO camera & VTX

1 x 3.8V 250mah 30C/60C battery

1 x USB Lipo/LIHV charger

1 x Propeller disassemble tool

1 x Screwdriver

 

Standard version

1 x Snapper 6 frame

1 x Crazybee F3 FC (Frsky and Flysky option)

4 x SE0603 KV19000 Motor

1 x 31mm 3-blades propeller set (4cw+4ccw)

1 x AIO camera & VTX

3 x 3.8V 250mah 30C/60C battery

1 x 1S06 6 way Lipo/LIHV charger

1 x Propeller disassemble tool

1 x Screwdriver

,,,,,,,,

Prices for Happymodel Snapper6 65mm Standart in stores

Deals found: 25 ()

See also

Happymodel Snapper6 65mm Basic

$70

Join to our channels: new products, coupons, best deals: